You are not logged in.
Pages: 1
Hi, I'm getting problems trying to flash the tft files for the Nextion display.
I keep getting error "File version is too low" on the screen.
Apparently this happens with certain newer Nextion displays, these have instructions that in able to get a working tft the HMI image needs to be compiled with Nextion editor 1.63 or later.
And it instructs users to recompile their HMI with the new editor.
Since we do not have the HMI for the Nanodlp interface, what to do to get a working tft?
Offline
Can you check download TFT and apply again?
Offline
It's good and up to date now. Thx Shahin.
Offline
Hi
I tried with the latest version of the tft files (1.3.1) and I am unable to get it to work.
I have two screen NX8048T050_011R and NX8048K050_011R and neither would work.
I made sure the screens worked with sample applications. These were downloaded via serial and SD card
Are the 1.3.1 version files (e.g. 5inch-basic1.3.1.tft) the lastest version?
Offline
Same problem . " File version is too low" . Can you recompile with 1.651 . version of editor?.
Thanks.
Last edited by Rustikus (2024-02-14 20:56:35)
Offline
The new build will be available next week.
Offline
Pages: 1