You are not logged in.

#1 2021-07-01 12:20:18

kevin_wch
Member
Registered: 2021-07-01
Posts: 5

Nanodlp with Raspberry Pi 4 B

Hello all

I am using Raspberry Pi 3B before with nanodlp build 1693 on sd card, and just upgrade to Raspberry Pi 4 B .
So I mount the latest .img and flash it with build 4209

It runs normally on Pi 3B but when I change the sd card to Pi 4B, it can't run Nanodlp.  How can I fix this?

Thanks

Offline

#2 2021-07-01 19:22:14

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Nanodlp with Raspberry Pi 4 B

Usually it indicate SD image is old and require os/firmware upgrade to support newer pi versions.

Offline

#3 2021-07-01 19:43:14

kevin_wch
Member
Registered: 2021-07-01
Posts: 5

Re: Nanodlp with Raspberry Pi 4 B

Thanks for your reply!
I have download the latest IMG file from nanodlp website and write it on as card.
How can I upgrade the firmware?
Thanks

Offline

#4 2021-07-03 05:14:45

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,536

Re: Nanodlp with Raspberry Pi 4 B

If it is downloaded from nanodlp website, it should work with pi 4 out of the box.
Have you tried pi4 booting with other SD cards?

Offline

#5 2021-07-03 05:48:20

kevin_wch
Member
Registered: 2021-07-01
Posts: 5

Re: Nanodlp with Raspberry Pi 4 B

the sd card with latest nanodlp works on raspberry pi 3b
but when i put it on 4b ,it doesn't boot.
I have restored machine setting in nanodlp when it loaded in raspberry pi 3b
Was it related to the machine setting?
Thanks

Offline

#6 2021-07-03 12:22:38

kevin_wch
Member
Registered: 2021-07-01
Posts: 5

Re: Nanodlp with Raspberry Pi 4 B

fixed. upgrade to latest 4400 version
But I think that it was my problem of typing the wrong IP address
Thanks a lot!

Offline

Board footer

Powered by FluxBB