You are not logged in.
i have 3 problems 1- This plate is corrupt. 2- Plate generated using old profile data. 3-plates disappear after uploading them
i already printed few stl but directly on the plate without any supports it works fine and perfectly but once i use supports i get this plate is corrupt
and about plate generated using old profile data , i already regenerate and yet the same error and added this plate is corrupt , what is weird about it that stl was printed yesterday fine and perfectly because it was directly on the plate without any supports
i will upload the debug and stl file
STL -----> https://drive.google.com/file/d/1nkQuZ8 … sp=sharing
Debug ------> https://drive.google.com/file/d/1GvUdVh … sp=sharing
NOTE i deleted all the plates and yet plates disappear
NOTE the stl files i printed yesterday without any problems , after deleting them and re upload , they simply disappears
NOTE the new STL which says this plate is corrupt then i try to print , the first 8 layers works fine , then there is no more layers appears
Free Disk Space: 54147MB
build #4144
Offline
Can you try calibration, see if it works correctly. I guess plates folder got deleted. I cannot reproduce the issue locally.
1. Plate corrupted, probably caused by your support generation software. Sometimes issue is that critical and you can use it.
2. How it happens?
3. Strange, could not reproduce it.
Offline
i did printed two times the calibration STL FILE they work perfectly , i found weird fix last like 24 hours only then the problem appears again , its to formate the SD CARD and reinstall everything again but the next day the problems happens again
Offline
update, using SLC, and Zip files from chitubox slicer , don't show any problems or errors except it doesnt show image as thumbnail, maybe because nanodlp didn't slice it or its bug in nanodlp i dont know
NOTE : OBJ doesnt work in anyways even after nanodlp slice it
Offline
lets do anydesk or hare sd image after it breaks
Offline
ok will contact you on facebook after my exams
Offline