2024-03-10T22:10:52ZFluxBBhttps://www.nano3dtech.com/forum/index.phpIs there a benefit for being in core? I think all editors appart from basic text editor should be plugins, but maybe some added by default.]]>https://www.nano3dtech.com/forum/profile.php?id=503012024-03-10T22:10:52Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=1663&action=newYou can use URL /projector/display/ to display any image]]>https://www.nano3dtech.com/forum/profile.php?id=22023-03-01T06:46:09Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=5446&action=newGrazie per la tua risposta. Hai qualche esempio di stampanti del genere?]]>https://www.nano3dtech.com/forum/profile.php?id=176782021-09-02T06:59:54Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=4076&action=newfixed. upgrade to latest 4400 version But I think that it was my problem of typing the wrong IP address Thanks a lot!]]>https://www.nano3dtech.com/forum/profile.php?id=164722021-07-03T12:22:38Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=3852&action=newYou can export STL and slice it on NanoDLP.]]>https://www.nano3dtech.com/forum/profile.php?id=22021-01-18T10:57:35Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2839&action=newDarren,
We will try to update them as soon as possible.
]]>https://www.nano3dtech.com/forum/profile.php?id=22020-06-11T03:51:29Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2520&action=newDepend on file size, only slicing and 3D previous takes lots of RAM. For other functionalities 50MB will be more than enough.]]>https://www.nano3dtech.com/forum/profile.php?id=22020-05-19T17:28:38Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2502&action=newI am thinking this post might get a better response if it was posted to "nanaDLP / Help and Support" section not "nanoSupport / Feature Request" section. Sadly I don't know much about the mechanicals part of nanoDLP so I can't really help with this question....If stepper engages but doesn't move I'd check for a mechanical problem....like a shaft coupler or something...or possible wiring issue with the stepper.]]>https://www.nano3dtech.com/forum/profile.php?id=6552019-12-11T00:04:46Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2249&action=newFixed, the next version will have corrected camera and movement behavior]]>https://www.nano3dtech.com/forum/profile.php?id=22019-12-10T06:19:12Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2238&action=newNoted, thanks.]]>https://www.nano3dtech.com/forum/profile.php?id=22019-12-03T06:15:27Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2237&action=newAdded to backlog, thank you.]]>https://www.nano3dtech.com/forum/profile.php?id=22019-12-02T21:13:31Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2236&action=newThank you for the insight. We are working hard to improve things.
NanoDLP export must work, probably it is firewall issue but it still should be usable by entering IP of nanodlp manually.
]]>https://www.nano3dtech.com/forum/profile.php?id=22019-10-18T05:29:57Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=1883&action=newNanodlp does not support it, but using HDMI settings on config.txt you can add pads around the display.]]>https://www.nano3dtech.com/forum/profile.php?id=22019-10-11T06:57:18Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2129&action=newBurn-in layer actual height is what you have entered but what will be counted is the same as normal layers.]]>https://www.nano3dtech.com/forum/profile.php?id=22019-09-19T04:22:47Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=2091&action=newYou can easily modify html/css/js files to add it.]]>https://www.nano3dtech.com/forum/profile.php?id=22019-05-29T19:06:29Zhttps://www.nano3dtech.com/forum/viewtopic.php?id=1937&action=new